MP-1000 Stereo Preamplifier       The MP-1000 features six analog inputs, two of which are balanced. There are two outputs, one single-ended and one balanced. The updated front panel has metal buttons for all functions of the preamplifier. The dot matrix display shows the volume level as well as the selected input signal. You can select directly between inputs, adjust volume level and change the brightness of the display via the included aluminum handheld remote.       MP-1000 Highlights Sophisticated low noise and low distortion design. Quiet and precise volume control with adjustment in small steps. Dot matrix display with brightness control. Indepedent power supply for each channel with dual custom wound audio grade toroidal transformers. The transformers are encapsulated in thick steel can with audio grade expoxy to protect against electrostatic and magnetic interference. Highest quality passive components used in all applications. Advance layout and wiring techniques guarantee a hum free operation. Balanced (XLR) and single-ended (RCA) inputs and outputs. Full aluminum housing remote control. Handcrafted in California, USA. Image Gallery Specifications Frequency Response: +/- 0.1 dB from 10 Hz to 50 kHz Signal-to-Noise Ratio: -103 dB, reference level: full power output Total Harmonic Distortion (THD): < 0.002% Gain: 22 dB Input Impedance: 50k Ohms single-ended 100k Ohms balanced Output Impedance: 200 Ohms single-ended 400 Ohms balanced Power Consumption: 30 Watts maximum Inputs: 2 pair balanced via XLR connectors 4 pair single-ended via RCA connectors Outputs: 1 pair balanced via XLR connectors 1 pair single-ended via RCA connectors Operating Voltage: 100V, 120V, 220V, 230V or 240V at 50 or 60 Hz (preset prior shipping) Dimensions: 18.5 in. W x 16 in. D x 4.75 in. H Weight: 30 lbs. Specifications subject to change without notice.